Product Description
IN THE BOX
(1) 5650-8-DT-J Moxa 8 Port Serial Device Server 10/100M RS-232/422/485 RJ45 8pin
Note: Includes 100 to 240V AC Power Supply AU Plug
Brand New and Packed in Retail Packaging
DETAILS
Introduction
With the NPort 5600 Rackmount Series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 8 Serial Devices
Only basic configuration is needed with the NPort 5600 to connect up to 8 serial devices to an Ethernet network.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort 5650-8 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.
(1) 5650-8-DT-J Moxa 8 Port Serial Device Server 10/100M RS-232/422/485 RJ45 8pin
Note: Includes 100 to 240V AC Power Supply AU Plug
Brand New and Packed in Retail Packaging
DETAILS
Introduction
With the NPort 5600 Rackmount Series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.
Network Readiness for up to 8 Serial Devices
Only basic configuration is needed with the NPort 5600 to connect up to 8 serial devices to an Ethernet network.
Real COM/TTY Ports
Real COM/TTY drivers are provided to make the serial ports on the NPort 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort 5650-8 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.
